![3DPrintSOS](/img/default-banner.jpg)
- Видео 352
- Просмотров 3 339 309
3DPrintSOS
США
Добавлен 26 дек 2020
3DPrintSOS - Your life preserver in a sea of broken benchies.
🛟 NEW merch store is here! SHOP.3DPRINTSOS.COM
🛟 Join the 3DPrintSOS Discord Server: discord.gg/JH2CCjcRpx
🛟 Become a Patron: www.patreon.com/3dprintsos
🛟 Buy me a coffee: www.paypal.com/paypalme/3dprintsos
____________________________________________________________________________________________________________________________
3DPRINTSOS - Fedor Sosnin - 2024 - All rights reserved.
Publication, reproduction of videos found on this channel by any means is strictly prohibited without the prior written consent of Fedor Sosnin. ALL VIDEOS on the 3DPRINTSOS RUclips channel are for entertainment purposes only.
NOTE: Some of the links featured in my videos are Affiliate Links. They do NOT cost you anything but using them and making a purchase helps the channel grow. Please consider using them. :)
🛟 NEW merch store is here! SHOP.3DPRINTSOS.COM
🛟 Join the 3DPrintSOS Discord Server: discord.gg/JH2CCjcRpx
🛟 Become a Patron: www.patreon.com/3dprintsos
🛟 Buy me a coffee: www.paypal.com/paypalme/3dprintsos
____________________________________________________________________________________________________________________________
3DPRINTSOS - Fedor Sosnin - 2024 - All rights reserved.
Publication, reproduction of videos found on this channel by any means is strictly prohibited without the prior written consent of Fedor Sosnin. ALL VIDEOS on the 3DPRINTSOS RUclips channel are for entertainment purposes only.
NOTE: Some of the links featured in my videos are Affiliate Links. They do NOT cost you anything but using them and making a purchase helps the channel grow. Please consider using them. :)
A Modular Filament Dryer! Polymaker PolyDryer.
This Filament Dryer by Polymaker is exactly what I was looking for my office space. Its Modular, well build, and unique. You can both dry & store your filament in one system. What’s not to like?
------------------------------
IN THIS VIDEO:
--------------🔗--------------
▶️ Polymaker PolyDryer
🛟 www.3dprintsos.com/polymaker-polydryer
▶️ QidiTech Q1 Pro
🛟 3dprintsos.com/qiditech-q1pro
▶️ Double Barrel Mod
🛟 www.printables.com/model/865750-polymaker-polydryer-double-barrel-mod
▶️ 3D Printing Nerd’s Video
🛟 ruclips.net/video/7DjjBLNN4LI/видео.html
------------------------------
TIMESTAMPS:
--------------🕥--------------
0:00 - TEASER
00:27 - INTRO
00:56 - DISCLAIMER
1:14 - WHY DO YOU NEED THIS?
1:35 - FIXDRY FI...
------------------------------
IN THIS VIDEO:
--------------🔗--------------
▶️ Polymaker PolyDryer
🛟 www.3dprintsos.com/polymaker-polydryer
▶️ QidiTech Q1 Pro
🛟 3dprintsos.com/qiditech-q1pro
▶️ Double Barrel Mod
🛟 www.printables.com/model/865750-polymaker-polydryer-double-barrel-mod
▶️ 3D Printing Nerd’s Video
🛟 ruclips.net/video/7DjjBLNN4LI/видео.html
------------------------------
TIMESTAMPS:
--------------🕥--------------
0:00 - TEASER
00:27 - INTRO
00:56 - DISCLAIMER
1:14 - WHY DO YOU NEED THIS?
1:35 - FIXDRY FI...
Просмотров: 2 018
Видео
Concept to 3D Print in 2 hours + Fysetc V0.2 R1 Voron Kit Review
Просмотров 2,5 тыс.Месяц назад
Concept to 3D Print in 2 hours Fysetc V0.2 R1 Voron Kit Review
BambuLab A1 Mini vs FlashForge 5M vs Kingroon KLP1 vs Infimech TX
Просмотров 8 тыс.Месяц назад
BambuLab A1 Mini vs FlashForge 5M vs Kingroon KLP1 vs Infimech TX
My BIGGEST Print BY FAR! Creality Ferret Pro + K1 Max
Просмотров 1,5 тыс.2 месяца назад
My BIGGEST Print BY FAR! Creality Ferret Pro K1 Max
QidiTech's Q1 Pro Seriously Raises The Bar for 3D Printers
Просмотров 9 тыс.3 месяца назад
QidiTech's Q1 Pro Seriously Raises The Bar for 3D Printers
TwoTrees SK1 - A Pre-Built Voron Trident or Another Clone?
Просмотров 3,3 тыс.3 месяца назад
TwoTrees SK1 - A Pre-Built Voron Trident or Another Clone?
Huge Slingers! - Elegoo Neptune 4 Plus vs Mingda Magician Pro 2
Просмотров 5 тыс.5 месяцев назад
Huge Slingers! - Elegoo Neptune 4 Plus vs Mingda Magician Pro 2
Livestream Clip: Root + Fluidd on Creality K1C
Просмотров 4,3 тыс.5 месяцев назад
Livestream Clip: Root Fluidd on Creality K1C
Livestream Clip: How to lube linear rails
Просмотров 1,1 тыс.6 месяцев назад
Livestream Clip: How to lube linear rails
Project: Scan & Print with Creality Ferret Pro & K1 Max
Просмотров 1,3 тыс.6 месяцев назад
Project: Scan & Print with Creality Ferret Pro & K1 Max
PSA! Z-Offset Doubling on Klipper Printers with Custom Screens
Просмотров 1,2 тыс.6 месяцев назад
PSA! Z-Offset Doubling on Klipper Printers with Custom Screens
Creality Ender 3 V3 SE vs Ender 3 V3 KE vs CR10 SE
Просмотров 66 тыс.7 месяцев назад
Creality Ender 3 V3 SE vs Ender 3 V3 KE vs CR10 SE
You've Printed OVER 1600 Toys 4 Tots!
Просмотров 6387 месяцев назад
You've Printed OVER 1600 Toys 4 Tots!
This Desk is PERFECT for 3D Printing - FlexiSpot F7QB
Просмотров 2,5 тыс.7 месяцев назад
This Desk is PERFECT for 3D Printing - FlexiSpot F7QB
3DPrinting is finally SUPER easy! - Flashforge Adventurer 5M
Просмотров 29 тыс.8 месяцев назад
3DPrinting is finally SUPER easy! - Flashforge Adventurer 5M
Rooting Creality K1 & K1 Max - Why & How
Просмотров 70 тыс.8 месяцев назад
Rooting Creality K1 & K1 Max - Why & How
$200 & Zero Calibration - Creality Ender 3 V3 SE
Просмотров 29 тыс.9 месяцев назад
$200 & Zero Calibration - Creality Ender 3 V3 SE
Underrated CoreXY Machine - Flying Bear Reborn 2
Просмотров 8 тыс.9 месяцев назад
Underrated CoreXY Machine - Flying Bear Reborn 2
ERRF 2023 - Day 2 & Creality Sharefest
Просмотров 1,3 тыс.9 месяцев назад
ERRF 2023 - Day 2 & Creality Sharefest
QidiTech Stepped up BIG TIME - The NEWLY UPDATED X-Plus3
Просмотров 9 тыс.10 месяцев назад
QidiTech Stepped up BIG TIME - The NEWLY UPDATED X-Plus3
Add KLIPPER to your 3D Printer with BigTreeTech's PAD 7 or CB1
Просмотров 6 тыс.11 месяцев назад
Add KLIPPER to your 3D Printer with BigTreeTech's PAD 7 or CB1
Sovol SV06 vs Mingda Magician X2 - Budget Machines PACKED with Features
Просмотров 1 тыс.11 месяцев назад
Sovol SV06 vs Mingda Magician X2 - Budget Machines PACKED with Features
My Voron Trident is FINALLY Done! - Fysetc Trident 300 Kit Review
Просмотров 15 тыс.Год назад
My Voron Trident is FINALLY Done! - Fysetc Trident 300 Kit Review
This CoreXY is TOTALLY flying under the radar! - FlyingBear Ghost 6
Просмотров 12 тыс.Год назад
This CoreXY is TOTALLY flying under the radar! - FlyingBear Ghost 6
Get FULL KLIPPER Access on your Creality K1
Просмотров 34 тыс.Год назад
Get FULL KLIPPER Access on your Creality K1
Does the tall skirt allow you to print ABS without an enclosure?
Exactly. That’s called a “draft shield”. It works!
Our 11 year old daughter buster her rear to try and get one for selling cookies in Girl Scouts. We told her if she sold 2500 boxes, I would buy her a decent one instead of the super cheap one from an unknown name that would require she sold 4000 boxes. A bit of research I got the FlashForge 5m Pro and have been mostly happy for us all as beginners. Easy to learn though the instructions with more info on things like maintenance times, what and how would be nice. Firmware updates are super easy since it tells you there is one and you just tell it to update. The software is easy to use and it also allows Orca Slicer for when you want to play more. We have printed plenty of PLA, PLA+, TPU and ASA with it with few issues. It tends to prefer PLA+ and ASA over plain PLA. Filament changes are easy and it has some really nice features when you are learning. As for the downsides, we are thinking a Bambu Labs next for the multi color ability and after over 600 hours of use, the filament feeder is in need of being replaced. Good luck in getting one though. Parts are pretty much out of stock and you have to pay a premium from other sellers. He is right that it wants to print balls to the wall speed wise and slowing it down really helps improve things for the quality. The heads are easy to change and about $40 each but you can get a set of 5 from .8 to .125 for $130 so a small savings there. But overall, we are happy with it for a starter machine and have plans for plenty of more things we will be making with it.
Is that like the Bambu Galaxy and/or Sparkle?
Yes but transparent.
Very nice. I had a similar twinkling blue, but by another company, sometimes I think these companies just buy filament and rebrand it or something. I've come across quite a few colors that are exactly the same except the brand. This baby blue is so pretty tho
They probably do. I would be surprised if SunLu made most of them. Haha
Awesome! Do you sell the files?
Какой классный принтер,может столько корабликов из пла напечатать, незаменимая вещ просто.😂
Where can I find the build kit for the crossbow? 🤔
Small bed
Yes, a 300x300 would be great
No not the beautiful ds lites and u should do a giveaway of 10 of them
The point is that they are all broken DSLites destined for the dump. But this is a way to breathe new life into them. 10! I wish I could.
I got my printer second-hand, and the filament is not sticking to the plate. Do you have any tips to help with that?
I would start by cleaning the bed with dishsoap and warm water. Make sure it’s fully dry. Then do a bed level procedure (I have some videos on that) and give it another go. 70c on the bed should be good. You can let it warm up for a few minutes before printing. That will help.
@3DPrintSOS Thank you, sir. Got it to stick, some spots were popping up, so I slowed the print rate and increase flow and that worked. Just finished my first print. Your help is much appreciated.
What is it capable of playing and how much for one
It’s capable of playing GB Advance cartrages. But if you are using an R4 card or a EZ-Flash cartrage, you can play Gameboy, Gameboy color, Advance, NES, and NeoArcade. No price just yet, but I will have some after I make a video tutorial.
That one-handed pour, though, solid.
Skiiillls ;)
What nozzle are you using?
@@gabeplays9441 completely stock. .04
How can I increase my quality, it’s not the best.
I wonder if it was wound too tightly.
Yo I am personally looking at getting ether am a1 or an a1mini but i have an flsun but i am having non stop adhesion issue to the point where the first layer gets kicked off while printing itself
ooo where find these files
Im new to printing. And i was told that i need a laptop to be able to use this printer. What do you all recommend? Brand and price would help me. Sorry for the dumb question.
Do you have a cad model for the aux fan? Looks good
Excellent tutorial🤙
bro look at the foot it's a manequin
HI OR HELLO , AND THANKS FOR THE VIDEO, EVEN THOUGH ITS BEEN 8 MONTHS FROM THIS VIDEO , I HAVE PURCHACED A K1 MAX , AND THINKING OF ROOTING IT, MY QUESTION IS , BEING THAT IN THE NEAR FUTURE AFTER CREALITY STARTS SHIPPING THE K2 PLUS AS YOU KNOW . THE MULTI-MATERIAL SYSTEM WILL BE AVAILABLE , FOR THE K CERISE , WILL THE CFS SYSTEM WORK WITH THE PRINTER THAT IS ROOTED OR DO WE HAVE TO RESET THE K1 MAX TO FACTORY, . THANKS ONCE AGAIN.
I saw your video on the qidi x plus 3 and was wondering if you would recomend that to others or get somthing like the qidi q1 pro because i was looking for a new printer around the 500 dollar mark
Definitely watch my Q1 pro video. highly recommend.
Q1 is $419 with code right now crazy good deal.
I've tried this but it never comes out clear. Just translucent/foggy... 😢
Bro gonna get the atf on his ass
haha nah that’s now what it looks like. Its part of a bow.
is it made of lw pla?
i root my nebula an work amazing since i update the ui in the ./installer inside the linux manchine, when i install everthing fail, so y try to restore to fabric but now i can ssh to the linux machine to reinstall everything, i try to use this (Creality Factory Reset Utility:) but really not understand what i need to do, do i need to download to inside the linux machine (i lost the access)?
What kind of filament did you use?
IIIDMax Carbon PLA.
@@3DPrintSOS many thanks
that is lot of minuts printing hahaha
Looking good
Looking great!! You going to need another PSU for the extra toolheads no?
For sure. Im going to add a 300w unit in additon to the one thats there to run the initial system.
That is really impressive.
Looking good Fedor.
Now you do know its not going to print very well that way up?
LMAO
I'm having such a hard time trying to decide between X1C and P1S. I don't plan on doing too much non pla printing. but I love the extra features
This won’t make it any easier, but you will be happy with either one. They are great.
Has anyone ever printed a 3D printer?
I do it all the time!
That had to take YEARS TO MAKE 😮
I solid month for sure.
Who won the filament? I can’t find it :)
Hello, can you share your printer.cfg file?
i am new to 3d printing and i have the ghost 6 and pad7. until i found this video i was completely at a loss. you have saved my life good sir thank you very much
Glad I could help you in some way! Jump into our Discord and feel free to share your machine build and cool prints. :)
hi, when p am looking to print tall prints , I Have an old old big Cr10, I get layer shifts /Z banding (I’m guessing most likely caused by the bed slinger wobbling ) at the top parts , I’d like to ask could this new ender print tall prints with no issues ? This ender is my first option to consider, my second option is the K2 plus. Thank you
I don’t know what it is but I’ve always been fascinated by a 3d printer I think it’s the fact you can make fully 3d models from an uploaded file which I find so clever, I think it’s really cool how sites like Etsy have 3d printed items to buy such as game cartridge storage containers which otherwise wouldn’t have been possible to purchase normally without the printer
You probably get less views on your vids bc instead of fkng talking about what you are actually doing, and trying to help people who are doing this build, trying to teach about it, you are focused on bullshitting about random totally unrelated shit and whining that you arent getting views on your video that is supposed to be about a build. This entire video "the build" was an afterthought. In no way did this video help me learn more about how to assemble the stealthchanger which is the only reason I was even here in the first place. If you want your videos to get noticed more then don't just post a live stream of you bullshitting about random shit unrelated to the video title. Upload a video that actually helps people like me assemble this stealthchanger system! There are like ZERO videos of people laying it all out on how to assemble the stealthchanger system, which is what 99% of the people like me who search for a video like this are actually looking for. So yeah, you def wont be getting a sub from me for this poor video and what was made to seem like a guide for assembling a stealthchanger system..
I think you are asking me to do work for you and be a free resource all while complaining about how I do it. I'm having fun chatting with my audience and you are looking for a handout. If you dont think these live streams are helpful, you dont have to watch them. I was talking about my videos that I put in significant time and effort into. Not hanging out, relaxing with my audience during a live stream designed for this. This comment wasn't constructive criticism, this was whining.
Drying filament in the oven isn't always a great idea. Oven says 60 but could be more or less
It’s a 250x250 and you said you wish it was the same as your outgoing printer that’s between 220 and 300.. last time I checked 250mm is between 220 and 300.
Wall mount the spools?
G'day. Will this work on the Nebula Pad on a V3 SE?